Termékek ggp italy f72 hidro (16)

Fullgear Series, is a mineral automotive gear oil that has been developed for all types of gear operating under normal conditions. It does not contain extreme pressure (EP) additives, so it is suitable to use in gear systems, synchronised transmissions and differentials not operating under high load.

Areas of Usage: These multiple wire bare copper or tinned copper cables, produced with flame retardant durable PVC are used in the installation of motor vehicles. PRODUCT CODE:FB250 CROSS SECTION (Cu):2,50 mm² STRANDED COPPER CONDUCTER (Cu):50x0,24 mm INSULATION MATERIAL AND DIAMETER(mm ±0,05) :PVC (according to ISO 6722-1, CLASS B AND CLASS C) 2,85 MIN. WALL THICKNESS (mm):0,28 APPROXIMATE WEIGHT (kg/km):26,00 CONDUCTOR RESISTANCE:<7,6 Ω/km WORKING TEMPERATURE:-40 to +105°C (CLASS B)

It is high performance automatic transmission oil that is obtained with the combination of very well-refined high quality base oils and modern additives. It is automatic transmission oil that is developed specially to fulfil the requirements of leading engine manufacturers such as GM Dexron III E, Toyota T-IV and Ford Mercon. Furthermore, it can be used power-shift transmissions, steering and hydraulic units.

Cages are designed to be unaffected by ground movements. There is a 2 mm thick cage leg at every 60 cm and wide legged pads placed under these legs. In addition, the cage system is fixed with steel pulling dies once every 10 legs. The system which gains maximum resistance on this count can be mounted 8 tier without platform, 12 tier without platform.

OFFER EN590 ( Gasoil , 10ppm ) Commodity: EN590 MQO: 50.000 MT - DLC or SBLC - Payment at destination port after final inspection/Dip Test.

Est une huile de système hydraulique haute performance qui convient à une utilisation dans une large plage de températures. Il peut être utilisé dans tous les types d équipements de construction et de système hydraulique même sous haute pression en raison de son additif spécial dans son contenu. Il offre une protection supérieure dans les systèmes hydrauliques dans des conditions de fonctionnement extrêmes.

Fullpro HT LSPS 5W-30, is a ultra high performance synthetic diesel engine oil that is based on state of art additive technology. Low sulphated ash, phosphor and sulphur (Low SAPS) content improves efiiciency of exhaust gas emission systems such as Diesel Particulate Filter (DPF). Its special formula enables easy cold starting, piston cleanliness, low oil consumption and minimized exhaust gas emission level in heavy commercial vehicles.

It is synthetic engine oil, that is prepared by adding advanced technological additive packs to synthetic base oils. It is suitable for any kind of gasoline and diesel passenger vehicles. Feature and Benefits • It provides fuel cost saving and long service life on account of its excellent viscosity control feature. • It provides extra protection against corrosion through special additive components it contains, and keeps its performance under any kind of operation conditions. • It makes operation under cold easier through its viscosity under low temperatures.

Fullgear FD 10W-30, is a multi purpose transmission oil for manual or automatic transmissions, hydraulic, axle, wet brake systems, final drives and PTO (Power take Off) of construction machines. Quality base oils and anti-friction additives in its formulation provide high performance while power transmission in moving components.

Fullgear LS 80W-90, is an automotive gear oil which is developed with quality base oils and advanced technology additives for limited slip(LS) differentials.

It is semi synthetic engine oil that is prepared by adding advanced technological additive packs to synthetic and high quality mineral based oils in order to meet lubrication requirements of modern, high speed, highly efficient, normal emission and turbo charge engines. It can be safely used in all vehicles operating with gasoline, diesel and LPG.

Fullmono HD Series, es un aceite de motor monogrado de alto rendimiento el cual está formulado con aceites base de calidad y aditivos especiales. Se recomienda elegir el grado de viscosidad de acuerdo con las condiciones climáticas.

It is an engine oil that can be used in any kind of modern and old diesel engines during the whole year. It is suitable to be used in fleets including lorry kinds having high motor powers so as to carry heavy loads. The special combination of high quality base oil with state-of-art additive technology provides effective protection and lubrication during the usage period of this oil. It is suitable to be used in any kind of turbo charge engine.

Fullgear HYP EP 75W-80, is a synthetic gear oil which is developed to use for manual transmissions of passenger cars. Its special formula provides protection against wear under cold operating conditions.

Is a high performance synthetic motor oil specially designed for maximum power generation of modern 4-stroke engines. It was developed to provide superior accumulation control and power protection under the most demanding operating conditions. Thanks to its excellent thermal and oxidation stability, it protects film strength at high temperature and reduces deposits especially in air-cooled engines. It provides full-performance stable power by reducing friction losses with optimized friction control. Effective lubrication at low ambient temperatures helps to start up easily and provides unique protection against wear. Excellent Viscosity stability softens the engine’s vibration and reduces noise. Its special designed detergent dispersing feature provides effective protection against rust and corrosion

Is a high performance hydraulic system oil which is suitable to use inwide temperature range. It can be used in all types of construction equipment and hydraulic system even under high pressure due to its special additive package in its content. It provides superior protection in hydraulic systems under extreme operating conditions.